6
START-UP AND OPERATION: BALLAST BOX / ELECTRICAL HOOKUP
1. Ballast Box Access
The ballast box may be located left rear (from
the customer front) against the end panel
inside the base of the case that contains the
shelves and doors.
Certain cases may have ballast box located at
rear case (see illustration below-left).
The box can be accessed by either sliding the
door open and reaching around OR removing
rear panel (4 screws).
2. Electrical Hook-up (Straight Base)
The electrical box for field hook-up is located in
the front of the base, directly under the bag
holder pan. It is located on the side of the case
the contains the shelves and doors.
The box can be accessed by lifting the bag
holder pan up and out of place.
3. Electrical Hook-up (Angled Base)
The electrical box for field hook-up is located in
the rear of the base. It is located on the side of
the case the contains the shelves and doors.
The box can be accessed by sliding open the
rear storage door and reaching around the
door stop.
Bag Holder Pan
Electrical Box Behind
Front Panel
Electrical Box
Rear View of Model
HVP112.4906D Ballast Box
(With 3 Ballasts Shown)
Ballast
Box
Rear Doors
Door Stop
Panel
Electrical Box / Field Wiring
Box For Model CDR5723
