background image

Page 5 of 11 

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the crane. Do not 
use the crane while you are tired or under the influence of drugs, alcohol, or medication. A 
moment of inattention while operating the tool may result in serious personal injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 
parts. Air vents on the tool often cover moving parts and should be avoided. 

 

Wear the proper personal protective equipment when necessary. Use ANSIZ87.1 compliant safety 
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in 
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, 
and hearing protection when appropriate. This applies to all persons in the work area. 

 

Do not overreach. Keep proper footing and balance at all times.

 

 

CAUTION

 

CRANE USE AND CARE 

 

Do not force the crane. Products do a better job and are safer when used in the manner for which 
they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the product will operate properly 
and perform its intended function. Replace damaged or worn parts immediately. Never operate the 
product with a damaged part. 

 

Store the crane when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure than 
the crane itself.

 

Specific Operating Warnings 

WARNING

 

 

To prevent serious injury or property damage, read and understand the owner’s manual before 
use. 

 

Do not exceed the rated load capacity. 

 

Operate on a hard, level surface. 

 

Do not operate crane if the beam is not level. 

 

Be sure the trolley stoppers have been fixed to both ends of the beam. 

 

Ensure the load is centered before lifting. 

Содержание 52517












Отзывы: