Strongway 47036, Руководство пользователя

Страница: 4 / 25

4
IMPORTANT SAFETY CONSIDERATIONS
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUR READING THIS
MANUAL.
To maintain the Shop Press and user safety, the responsibility of the owner is to read and follow these
instructions. Inspect the service shop press for proper operation and function. Keep instructions readily
available for equipment operators. Make certain all equipment operators are properly trained;
understand how to safely and correctly operate the unit. Allow unit operation only with all parts in place
and operating properly. Use only genuine replacement parts. Service and maintain the unit only with
authorized or approved replacement parts negligence will make the shop press unsafe for use and void
the warranty. Carefully inspect the unit on a regular basis and perform all maintenance as required.
Store these instructions in the handle of your shop press. Keep all decals on the unit clean and visible.
Safety always follow safety precautions when installing and operating this shop press. Keep all decals
on the unit clean and visible. Before proceeding that you fully understand and comprehend the full
contents of this manual. Failure to operate this equipment as directed may cause injury or death. The
distributor is not responsible for any damages or injury caused by improper use or neglect
SAFETY MARKINGS
WARNING:
1. Study, understand, and follow all instructions before operating the device.
2. Do not exceed rated capacity.
3. Prior to use, make sure the press is securely anchored.
4. The press shall be installed and operated in accordance with federal (OSHA), state, and local
safety standards.
5. Ensure the work area is clean and free of any hazards before operation.
6. Operators and observers shall wear eye protection that meets ANSI Z87.1 and OSHA standards.
7. Keep hands, arms, feet, and legs out of the work area. Accidental slippage can result in personal
injury.
8. Use appropriate guarding to contain any pieces that may break or fly apart when applying force.
9. Use only press accessories having a capacity rating equal to or greater than the capacity of the
press.
10. Verify lift cables are slack before pressing on the bolster.
11. Avoid off-center loads.
12. No alterations shall be made to the product.
13. Do not use this press for any use other than the manufacturer specified usage.
14. Failure to heed and understand these instructions and markings may result in personal injury,
property damage, or both.