Subtitle Language
Press
to select your chosen
Subtitle Language
, then press
OK
Country
This item shows the region you been selected by fi rst time you install the TV.
Restore Factory Default
Press
to select this function, by pressing
OK
and enter the PIN code. You
will reset all the settings contained in the main menu and deleted all installed
channels. TV will go back to
First Time Installation
See chapter
3
.
Version Information
Your current software version is displayed.
HDMI CEC
See chapter
5.7.1
.
Home /Shop
Switch between
Home
modes and
Shop
modes with default more brightness
and Auto standby to off .
USB Clone
This option allows you to copy you channel list to USB device as back up.
Insert USB device and select
Back up
. To load this later back into TV, select
“Restore”.
5.7.1 HDMI CEC
CEC Control
Press
to turn the HDMI CEC
On
or
Off
.
Audio Receiver
Press
to turn the Audio Receiver
On
or
Off
.
Device Auto Power Off
Press
to turn on this feature. When fi nished turn off your TV. The
connected device will turn off automatically.
TV Auto Power On
Press
to select this option. When fi nished, turn on the connected device.
The TV will switch on automatically.
Device List
Press
OK
to open the main menu of device.
Device Menu
Access the device menu.
6.0 USB
6.1 Reminder when using the USB player
Some USB storage devices may not be compatible to operate smoothly with this TV.
Back up all of the data in the USB storage device in case data is lost due to an unexpected accident.
STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is
consumer's responsibility.
For large fi le sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode
otherwise the USB storage device or the fi les stored in it may be damaged.
Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) fi le
system provided with the Windows operating system. In case of a storage device formatted as a diff erent
utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not
exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB
Hard Disk and restart the TV system.
An “Unsupported File” message will be displayed if the fi le format is unsupported or the fi le is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
13
English
