P
ACKING THE
S
TELLAR
R
ESERVE
7. Layout the harness/container assembly as
though the wearer was lying face down,
head towards canopy. Anchor the rig so that
it cannot slide forward by weighting its pack
tray or by hooking the leg straps to a secure
fixture.
Insert the ripcord cable into its housing and
route the pin out of the yoke through the
reinforced slot located just beneath the
reserve top flap.
8. Set the right and the left deployment brakes by
pulling the brake loop through the guide ring and then
inserting the end of the toggle through the loop. Stow
the excess control line under the toggle.
16
Quasar II Owners Manual Rev.C 11/2000
Strong Enterprises