M
AINTENANCE AND
C
ARE
The Quasar II is manufactured under strict quality control standards from the finest materi-
als available, however your care will determine the useful service life of the system. Always use a
drag mat under the container when packing to avoid damage. Keep the rig out of direct sunlight as
much as possible to prevent the colors from fading. Never pack canopies of improper size into the
container. If they are too small, the pins will be loose and the likelihood of a premature container
opening is greatly increased. On the other hand if the canopies are too big, the pins will fit very tight
which may cause a hard pull on the reserve or a pilot chute in tow malfunction on the main. Also,
the container flaps will be stretched and their plastic stiffeners distorted, seriously shortening the
container’s life.
I
NSPECTION
The Quasar II and its components should be inspected for signs of wear or damage every fifty
jumps or at each reserve repack, whichever comes first. The closing loop, deployment bag, and pilot
chute of the main container will receive the majority of the wear and these items should be checked
each time the main is packed. The reserve closing loop should be replaced at each reserve repack.
Cleaning
When cleaning any of the rig’s closing flaps, the canopies should be removed first. To remove
minor soiled areas use a clean cloth dampened with warm soapy water. Grease and other petroleum
can be removed with lighter fluid. If the rig is severely soiled it may be washed in warm soapy water
after removing both canopies and all handles, AADs, etc. Use a mild soap such as Ivory Snow and
a soft brush.
31
Quasar II Owners Manual Rev.C
Strong Enterprises
