6.6.1
Normal adjustment "V50"
EKM-0096
5
6
1
3
4
2
Fig. 16
Two cam discs are arranged for each contact, which are continuously adjustable. According to the position of
the cam, the castor run can be doubled for a contact and the nominal travel shortened accordingly. The effective
cam angle (5) and the usable angle of the cam disc (6) are illustrated in the figure.
1. Loosen the nut (3).
Turn the cam discs (1) by hand to the required switching positions. To do so, use the 30° graduation of the
cam disc in conjunction with the pointer tip (4) of the locking plate (2) as an aid.
NOTE
The cam discs (1) can be adjusted independently of one another after loosening the nut (3). The lock-
ing plate (2) prevents the adjustment of a previously adjusted cam disc by adjusting the next disc.
2. Tighten the nut (3) to a tightening torque of 2,5 Nm.
3. All adjustments must be looked at in an inspection round and checked for functionality.
4. Mount the cover of the GTES, see section 6.7.
31
Mounting/operating instructions Gear limit switch Type series HGE • No. 152-00000 F • 10/2017
