Strom HANDYWASH SEHW3KA1, Руководство по установке

Страница: 5 / 12

W I R I N G S C H E M AT I C
I N S TA L L AT I O N
• This diagram is provided for your reference of the internal wiring of your Strom Limited water heating
product.
• No attempt should be made to change the internals of your water heater, doing so may be dangerous
and will invalidate your warranty.
• Your product MUST always be wired by a qualified electrician in accordance with all the relevent
regulations and laws in place at the time of installation.
ACTION 1
ACTION 2
ACTION 3
1. To connect the Sprayer Spout, start by ensuring the temperature control dial is set in the off position.
Remove the two screws at the base of the unit and then remove the front cover of the unit (ACTION 1).
Push the end of the water outlet sprayer firmly into the outlet out of the heating element and ensure
it is all the way in (ACTION 2). Push the plastic sleeve as high up as it can go then insert the circlip
into the two holes of the plastic sleeve (ACTION 3). Ensure the water outlet sprayer is firmly installed.