STRIDE SE-MC2U-SC, Руководство пользователя

Страница: 87 / 230

DHCP Enabled/Disabled:
The switch can automatically obtain an IP address from a server
using the Dynamic Host Configuration Protocol (DHCP). This can speed up initial set up,
as the network administrator does not have to find an open IP address.
IP address and Subnet Mask: The IP address of the switch can be changed to a user-defined
address along with a customized subnet mask.
Default gateway: A Gateway address is the address of a router that connects two different
networks. This can be an IP address or a Fully Qualified Domain Name (FQDN) such as
“domainname.org”.
Primary DNS server: A DNS server address will be required if domain names are used in
the switch settings. A Domain Name System Server converts a name, such as “domainname.
org”, into an IP address that is usable in the Ethernet messaging. Consult your network
administrator for the proper DNS address for your network.
Secondary DNS server:
A secondary DNS server can be configured in the case that the
Primary DNS server is unreachable.
NOTE: For additional security, advanced users can set the IP address to 0.0.0.0 to disable the web browser access .
However, any features requiring an IP address (i.e., web interface, etc.) will no longer be available.
NOTE: If DHCP has been enabled, it will be necessary to connect to the console port serially or via USB in order to
ascertain which IP address has been assigned so that you may be able to access the Switch using the web browser.
4-3
Chapter 4 - Managed Switch Software Setup
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. A