STRIDE SE-MC2U-SC, Руководство пользователя

Страница: 47 / 230

Technical Specifications (cont’d)
NOTE: Refer to SFP module specifications for details specific to the SFP installed.
NOTE: When powering multiple switches from a common power supply, it is most reliable to power the switches
sequentially rather than simultaneously. The characteristics of the power supply and the significant startup current of the
switches may result in an error in booting the switches when powered simultaneously.
SFP (Small Form Factor pluggable) Ports
Note: On the Gigabit (MG) models these ports are pluggable and accept any SFP Multi-Source Agreement compliant transceiver.
Gigabit SFP ports
2 or 4 depending on model
Port Types Supported
All SFP Multi-Source Agreement compliant transceivers
Note: 100 Mbps fiber transceiver modules are also supported on these ports.
Ethernet Compliance
1000BaseT and 1000BaseF (SX/LX/LH)
Eye safety
IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
SC or ST Fiber Ports: 100BaseF multimode
100BaseFX ports
1 on some unmanaged switch models
2 on some managed switch models
Fiber port mode
Multimode (mm)
Fiber port connector
Duplex SC or ST
Optimal fiber cable
50/125 or 62.5/125 µm for mm; 9/125 µm for sm
Center wavelength
1300 nm
Multimode
Links up to 4 km typ.; 1300 nm; use with 50 or 62.5/125 um fiber
> Transmitter power (dB): -21 min, -17 typ, -14 max
> Receiver sensitivity (dB): -34 typ, -31 max
Nominal max. distance
(full duplex)
(see web for details)
4 km
Half and Full Duplex
Full duplex
Ethernet Compliance
100BaseF
Eye Safety IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
1-33
Chapter 1 - Hardware
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B