STRIDE SE-MC2U-SC, Руководство пользователя, Страница: 165 / 230

Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
Appendix A - Troubleshooting
On the VLAN Port Settings page:
Set Port 2’s type to Network. We will connect another managed switch configured with
VLANs 20 and 30 to port 2.
For ports 3 through 8, enter the PVID (Port VLAN ID) to match the VLAN ID that each
port was configured to participate in on the VLAN Settings page. In our example, a device
such as a PLC, HMI, etc is assumed to be connected to ports 3-8; no managed switch is
connected to these ports. So they are identified as Edge ports here.
With this configuration committed to the switch, a device on port 3 can communicate with
devices on ports 5 and 7 as well as devices on the VLAN 20 ports from the switch connected
to port 2. None of those devices (ports 3, 5 or 7 here or any device on a VLAN 20 port on
the switch connected to port 2) can communicate with devices connected to ports 4,6 or 8, or
VLAN 30 ports on the switch connected to port 2.
Devices on ports 4, 6 and 8 can communicate with each other and with devices connected to
VLAN 30 ports on the switch connected to port2, but not to the VLAN 20 devices.
Port 1 is reserved for switch management and is assumed to have a laptop occasionally
connected for that purpose
Although the tag-based VLANs are the most common and most versatile, the Port-based
VLANs are the simplest. The Port-based VLANs are restricted to ports on this one switch.
There is no Network (trunking) port to carry the VLANs across multiple switches.
Set VLAN mode to Port-based and Add VLANs with Type set to Port-based. Select which
ports belong to each VLAN. A port should belong to only one Port-based VLAN. CPU
should be checked for each Port-based VLAN.
A-7