Section 1: Main Components
Stretch Unit
System Coolant Inlet and Outlet Valves
:
Be sure to supply cool water when in operation.
Failure to do so may lead to overheating
inside the incubator or motor burnout.
Chamber Length Adjusting Knob
:
Use the knob to adjust the distance of
chamber brackets to maintain tension on the
chamber. The bottom of the chamber should
be taut.
Connectors:
Use Connector Cable to connect
Control Unit to Stretch Unit.
Alignment Pins:
Holds Strain Chamber Brackets in place.
Chamber Brackets:
Each chamber is mounted on four
pins, two pins on each bracket.
Mounting Stage:
Brackets sit on top of the
stage.
3
