temperature and switch off immediately after use.
- Soldering tools become extremely hot during use. Do not touch any part of the tool other than the handle
- Switch off and allow the tool to cool completely before attempting to change any fittings
- Do not leave this tool unattended whilst hot
- Heat may be conducted to hidden areas or materials near to the work area. Ensure that there are no
flammable materials in the vicinity of the work area
- Residual heat may cause waste material to ignite, even after the tool has been disconnected from the power
supply
- Never use these tools near any kind of fuel tank or gas cylinder
- Soldering with certain materials may result in toxic fumes. Always allow adequate ventilation. Do not use in
confined spaces
- Some types of solder may contain high proportions of lead. Molten lead emits toxic fumes, always wear
good quality appropriate breathing protection
- Lead fumes are especially toxic to children, pregnant women and people with high blood pressure. People
at high risk should not be allowed near to the work area
- Always dispose of waste material responsibly
FEATURES:
................... .............................................
1. Soldering iron
2. Solder reel (φ
1.0 mm-10 g,
φ
1.5mm-10g)
3. Storage compartment for tips
4. Temperature control
5. ON/OFF switch
6. Soldering sponge
7. Soldering tip-Cone
8. Coil spring
INCLUDED ITEMS:
...............................................................
1 Soldering station with soldering iron includes 2 standard
soldering tips (1x mounted)
1 Solder reel, φ 1.0mm, 10g
1 Solder reel, φ 1.5mm, 10g
1 Solder sponge
1 Iron holder
TECHNICAL INFORMATION:
.......................................................................................................... ..............
VOLTAGE/FREQUENCY
230 V/50 Hz
POWER CONSUMPTION
48 W
TEMPERATURE RANGE
100-500
℃
HEAT-UP TIME
3-5 min
INSULATION
I
CABLE
1.8 m
BEFORE FIRST USE:
.................................. ............................................................................
FITTING THE COIL SPRING:
- Push the bracket of the coil spring up to the stop into the slot provided on the soldering station.
