CARACTERISTICI:
...... .............................................
1. Ciocan de lipit
2. Bobină aliaj de lipit (φ1,0 mm-10 g, φ1,5mm-10g)
3. Compartimentul de depozitare pentru vârfuri
4. Controlul temperaturii
5. Comutator ON / OFF
6. Burete de lipit
7. Con-vârf de lipit
8. Arc elicoidal
ARTICOLE INCLUSE:
............................................................
1 Staţia de lipit cu pistol de lipit include 2 vârfuri standard de
lipit (1x montate)
1 Bobină pentru aliaj de lipit, φ 1,0mm, 10g
1 Bobină pentru aliaj de lipit, φ 1,5mm, 10g
1 Burete de lipit
1 Suport pentru pistol
INFORMAŢII TEHNICE
:
................... ....................................................................................... ..............
TENSIUNE / FRECVENŢĂ
230 V/50 Hz
CONSUM DE ENERGIE
48 W
GAMĂ DE TEMPERATURĂ:
100-500
℃
TIMP DE ÎNCĂLZIRE
3-5 min
IZOLAŢIE
I
LUNGIMEA CABLULUI
1.8 m
BEFORE FIRST USE:
.................................. ............................................................................
FITTING THE COIL SPRING:
- Push the bracket of the coil spring up to the stop into the slot provided on the soldering station.
INSERTING/REPLACING THE SOLDERING TIP:
CAUTION! RISK OF BURNS!
Never heat the soldering iron without a soldering tip .
- The soldering tip may only be removed when the appliance is switched off and the soldering tip is cooled
down.
- The soldering tip has a screw thread and can thus be removed quickly from the soldering iron.
- Unscrew the soldering tip anticlockwise.
-Screw the soldering tip in clockwise.
- Before use remove the protective cap from the soldering tip.
- Before using the soldering station for the first time and also before using a new soldering tip, the
soldering tip must be tinned.
Procedure:
- Plug the
mains plug into a wall socket and press the ON/OFF switch to position “I”.
- Set the temperature control to level 3 and wait until the appliance has heated up. Allow a little bit of
solder to melt into a thin film on the soldering tip.
ÎNAINTE DE PRIMA UT
ILIZARE:
………………………………………………………………………………………………………………
