EN
The solenoid gas valve is
not open
Check solenoid gas valve
There is no spark
Contact an authorized service center
THE BURNER LIGHTS UP
BUT AFTER FEW
SECONDS THE HEATER
STOPS
Too early release of gas
control valve
Hold the gas button for longer time (at least 20
seconds)
Gas leakage
Immediately close the gas valve on the gas cylinder,
switch off the appliance and unplug it. Then open all
the air vents in the room.
Overheating
Allow the heater to cool down for at least 5 minutes
before restarting it.
THE HEATER STOPS
DURING OPERATION
Excessive gas supply
Check the regulator and if required replace it
Insufficient air flow
Check that the motor works properly
Insufficient gas supply
due to ice formation on
the cylinder
Check the gas cylinder, remove ice appropriately.
WARNING OF LOCAL REGULATIONS
- For issues not mentioned in this manual please consult your gas supplier for help. Use the appliance according
to the local law requirements
ENVIROMENTAL PROTECTION
The equipment is shipped in protective packaging to prevent damage during transport.
Most of this packaging material is recyclable. Turn these materials over for recycling.
Return the equipment once taken out of service to its point of sale. The point of sale will
ensure its environmentally friendly disposal. Scrapped electrical appliances are
recyclable and may not be thrown out with household wastes! Please take an active role
in protecting our natural resources and environment by turning this appliance over to a
collection centre (if you have this option available).
