EN
heater to avoid skin burns.
CAUTION:
Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present.
WARNING:
Do
not cover! Covering the appliance can cause overheating, fire or electric shock!
- Always disconnect the heater from the power supply and gas cylinder before cleaning or not using it for an
extended period of time. Never pull out the plug from power outlet while the appliance is turned on and if you
have wet or damp hands. Make sure the power cord is not damaged.
-
WARNING:
Do not clean or repair the appliance while it is hot, still in use, the gas cylinder is connected or is
not disconnected from the power supply. There is a risk of burns or electric shock.
- Never modify the heater, alteration may cause malfunction and fire, is very dangerous.
- Do not use accessories that are not recommended by the manufacturer. Using incorrect accessories may pose
a hazard to the user and seriously damage your device
- If any irregular operation is detected (e.g., unusual noise or burnt odor from unit), immediately switch it off
and remove the power plug.
- If you smell the gas, it may be a gas leak. Immediately close the gas valve on the gas cylinder, switch off the
appliance and unplug it. Extinguish all open flame and turn off electrical appliances. Then open all the air vents
in the room.
- Protect from dust, humidity, sunlight and direct heat radiation
- Make sure that the flexible gas hose is not damaged (not folded or twisted), when storing or not using appliance.
(*) Authorized service: the after sales department of the manufacturer or importer or other person who is
qualified, approved and competent to carry out this type of repair free of risk. The heater must be handed in to
such a service under all circumstances.
OPERATION
- CORRECT REGULATOR AND GAS CYLINDER ARE REQUIRED FOR SAFE AND EFFICIENT USE OF THE HEATER.
USING THE WRONG OR INCORRECT REGULATOR OR GAS CYLINDER IS DANGEROUS AND RESULTS IN LOSING
VALIDITY OF THE WARRANTY.
Seller of gas appliances will provide you with the information about the most
suitable gas cylinders and regulators.
- Unpack the heater and make sure if it is not damaged. Do not use the damaged heater and contact your dealer.
Keep packaging materials away from children.
GAS CYLINDER CONNECTION:
- WARNING!
Perform assembly and replacement of gas cylinder in properly ventilated room only, preferably
outdoors and outside any ignition source like open flame, ignition burner, electrical igniters and away from the
other people.
- Prepare a full cylinder gas. The user can select a suitable gas cylinder according to the heating and gas
requirements on the product label or contact the gas supplier. (Recommended gas cylinder 10 Kg, dimensions
590 x 300 mm).
- Connect the regulator to the flexible gas hose.
- Connect the flexible gas hose to the heater.
- Mount the regulator to the gas bottle. Place the regulator in a way that the ventilation opening faced
downwards.
Note:
Make sure the gas cylinder valve or regulator lever is closed before connection.
- Check the position and good condition of the seal between the appliance and the gas hose, gas hose and
regulator and regulator and gas cylinder. Do not use the appliance that has a damaged or worn seal. Do not use
the appliance in case of leaks, damage or malfunction.
- Prevent the flexible hose from bending (breaking). Hose shall hang freely without any bends, twisting,
