Streck ESR-Auto Plus 506 Скачать руководство пользователя страница 67

Страница: 67 / 86

ESR-Auto Plus Operator’s Manual 59

9.1 User Precautions

All ESR-Auto Plus operators should follow Universal

Precautions for handling potentially infectious materials

analyzed in this instrument. Seek immediate medical

attention in the case of exposure to biological specimens.

9.2 Electrical Equipment

The power supply of all electrical equipment is a potential

source of danger. To avoid the risk of electrical shock

and/or damage to the instrument, operators should not

open the covers of live electrical parts of the instrument.

Only authorized Streck service personnel may open the

instrument to perform maintenance or repair. In addition,

Streck recommends plugging the ESR-Auto Plus and mixer

into a power surge protector for additional protection from

power surges and fluctuations. Contact Streck Technical

Service with any questions.

9.3 Disconnect Device

Turn the power switch off before removing or reinstalling any

connectors on the ESR-Auto Plus.
To disconnect the instrument, turn the power switch to the

“Off” position and unplug the power cable from the surge

protector. It is not necessary to routinely disconnect the

instrument when it is not in use.
ESR-Auto Plus operators should follow local regulations

regarding disposal of electronic equipment.

9.4 Sample Analysis

The operator should consider all biological samples

as potentially infectious. The operator should observe

Universal Precautions and follow established laboratory

safety regulations when handling all biological samples and

blood collection sharps. Wipe up any specimen spilled on

the instrument immediately and disinfect the contaminated

surface with a 0.5% sodium hypochlorite (bleach) solution.

Biological fluids and liquid waste should not be disposed

in general waste, but should be disposed with infectious

medical waste. Compliance with waste disposal regulations

is the responsibility of the operator.

9.5 Application of Secondary Labels

Caution must be taken when applying additional patient

labels to ESR-Vacuum Tubes. Excessive label thickness,

wrinkling or flagging may increase the outer diameter of the

tube enough to wedge it in the instrument. If the operator

experiences resistance when inserting a tube containing a

secondary label, they should remove the tube before it is fully

inserted and remove the additional label before proceeding.

Chapter 9

Safety Precautions

Содержание ESR-Auto Plus 506























































































Результаты поиска

Содержание ESR-Auto Plus 506

Отзывы:

Бренды по названию

Популярные бренды

Streck ESR-Auto Plus 506, Руководство оператора

Результаты поиска

Содержание ESR-Auto Plus 506

Отзывы:

Бренды по названию

Популярные бренды