Streck ESR-Auto Plus 506, Руководство оператора

Страница: 28 / 86

320597-3 - NOVEMBER 2016
20 ESR-Auto Plus Operator’s Manual
4.3 Menu 2: Check Position
Sample results may also be retrieved using the position
where the sample was run. The results may be reprinted on
the internal printer and/or DATA OUTPUT port.
menu
2.check pos 1—10
Press to search for a sample result by lane position.
check pos
give pos: 1_
Enter the position 1-10 as listed on the ESR-Auto Plus and
press . Press the
key to select position 10.
4.4 Sample Status
Search Sample and Check Position sample results are
displayed in the same manner. Samples can have two
different status options: In Process or Completed.
Sample In Process
1) 12345
7 minutes left.
If the sample is currently in process, the display will
show the position of the sample, the sample ID and the
time remaining until the sample is complete. After a few
seconds, the second row of the display will show menu
options.
1) 12345
1.predict result
1.PREDICT RESULT, press to predict the sample
result.
1) 12345
2.abort read
2.ABORT READ, press to cancel the measurement of
the sample. Press to continue to the next sample fitting
the search criteria.
Important! Correlation to Westergren Method
will decrease the earlier a sample is predicted. It
is not recommended to predict a sample more
than 15 minutes early. The predicted result
should always be confirmed when the final result
is available.