Streck ESR-Auto Plus 506, Руководство оператора

Страница: 40 / 86

320597-3 - NOVEMBER 2016
32 ESR-Auto Plus Operator’s Manual
5.3 Set Date and Time
The instrument has an internal real-time clock with battery
backup. Date and time will be maintained when the
instrument power is turned off. Date and time format can be
changed to display different international standards. Refer to
Section 6.3.
–user config–
set date&time?
Press to set the date or time.
Press to advance to the next menu selection.
date:yy—mm—dd
ok?
Press if the date is correct or if the date is incorrect.
The date format is displayed as set in the service menu.
set date:
00—00—00 (y—m—d)
Use the numeric keypad to change the date.
Press after the last digit to proceed to the time setting.
Press to go back one digit.
time: 12:00
ok?
Press if the time is correct or to change.
set time:
00:00 (hh:mm)
Use the numeric keypad to change the time.
Press to go back one digit.
If the 12-hour format is selected, press to change from
AM to PM at the end of the four time digits.
Press to accept changes.
5.4 Set Audible Alarm
The audible alarm function can be activated or deactivated
to signal the conclusion of each test result.
–user config–
set alarm?
Press to access the Audible Alarm Menu.
Press to advance to the next menu selection.
–audible alarm–
aud. alarm on?
Press to activate the audible alarm.
Press to turn it off and advance to the next menu
selection.
–audible alarm–
alarm tone 1?
If the audible alarm is activated, the alarm tones menu
will be displayed. The volume cannot be adjusted.
Press to select the displayed alarm tone.
Press to scroll through the available alarm tones.