3
USER MANUAL FOR INDEPENDENT PELLET FIRED BOILERS
SUPPLEMENTARY INSTALLATION INSTRUCTIONS FOR THE UK MARKET
TO BE READ IN CONJUNCTION WITH THOSE IN THE INSTRUCTION BOOKLET
READ THE INSTRUCTION BOOKLET AND THESE SUPPLEMENTARY INSTRUC-
TIONS CAREFULLY BEFORE INSTALLATION
These instructions together with those in the instruction booklet cover the basic principles to en-
sure the satisfactory installation of the boiler, although detail may need slight modification to suit
particular local site conditions.
In all cases the installation must comply with current Building Regulations, Local Authority
Byelaws and other specifications or regulations as they affect the installation of the boiler.
It should be noted that the Building Regulations requirements may be met by adopting the
relevant recommendations given in British Standards BS 8303, BS EN 15287-1:2007 as an
alternative means to achieve an equivalent level of performance to that obtained following
the guidance given in Approved Document J.
Should any conflict apply between these instructions and the original manufacturers in-
structions then the most stringent advice must apply.
Please note that it is a legal requirement under England and Wales Building Regulations
that the installation of the boiler is either carried out under Local Authority Building Control
approval or is installed by a Competent Person registered with a Government approved
Competent Persons Scheme. HETAS Ltd operate such a Scheme and a listing of their Reg-
istered Competent Persons can be found on their website at
www.hetas.co.uk
.
Use of the boiler
The manufacturer is not responsible for damages resulting from incorrect use. The operational parameters and adjust-
ments can only be modified with the approval of Strebel ltd. The use of parameters and adjustments outside the approved
range can cause damage or faults to the Boiler ,accessories and or the system. If the flue gas system is designed incorrectly
or heavily polluted or if the boiler is not cleaned regularly or the water supply fails, the manufacturer is not liable for dam-
age caused by such failures.
This manual contains very important stipulations as prepared by Hetas ,It is very im-
portant that this manual is fully studied before installation commences and all instruc-
tions are adhered to.
Содержание Biotec 25
Страница 1: ...INSTRUCTION BOOKLET BIOTEC 25 AND BIOTEC 40 Version BIOTECHTS122013 ...
Страница 2: ...2 ...