English
OPERATING INSTRUCTIONS FOR STREAMLIGHT
®
NIGHTFIGHTER
®
SERIES/TL-2
®
SERIES
Congratulations on the purchase of the Nightfighter
®
/TL-2
®
Series flashlight, a compact and
convenient little flashlight that is a powerhouse of performance. Proper care and use of this
product will provide years of dependable service.
BATTERY INSTALLATION/REMOVAL
1.
Unscrew the tail cap and remove depleted batteries.
2.
Insert batteries into barrel with the positive ends
pointing toward the flashlight head.
3.
Screw tail cap onto flashlight barrel and tighten.
WARNING: FIRE, EXPLOSION,
BURN HAZARD – USE ONLY RECOMMENDED LITHIUM BATTERIES
Inferior quality lithium batteries can cause fire, explosion, burns. We recommend the use of ONLY
Streamlight or Panasonic, Sanyo, Energizer or Duracell batteries in our products. Use of other
batteries or mixing brands and old and new batteries may risk leakage, fire, explosion and
serious personal injury. To further avoid this risk for any brand lithium battery, do not recharge,
misuse, short circuit, disassemble, improperly store or discard, expose to high temperatures.
WARNING:
The Nightfighter
®
and TL-2
®
(Xenon) utilize a high wattage Xenon bulb that can get
very hot. Never place the flashlight face-down against a flat surface or against any flammable
object. To transport or store, turn off the flashlight and unscrew the tail cap 1/8” to minimize
the possibility of accidental activation.
GENERAL OPERATION
Nightfighter
®
, Nightfighter
®
LED
• Press the tail switch for momentary activation or twist
the tailcap for steady “on”.
Nightfighter
®
X (Multi-function LED)
• High: From off, press and hold for momentary
activation; twist tailcap to lock on.
• Strobe: From off, fast double press and hold for
momentary activation; twist tailcap to lock
on.
WARNING
- Use of light in “strobe” mode may cause seizure in persons with photosensitive
epilepsy.
• Low: From off, fast triple press and hold for
momentary activation; twist tailcap lock
on.
