Streamit Lisa LCD, Руководство пользователя

Страница: 49 / 87

Lisa LCD 49
The first step in the Startup procedure is the software
initialization. As the name indicates, the software of the
device is properly initialized. Everything in this step is
transparent to the user.
The Lisa edition will be activated after the Lisa is
connected for the first time to the public internet.
This means that the Lisa devices always need to be
connected one time to the public internet before they can
be used in a private network.
If the configurations are retrieved from a platform (e.g.
Streamit ADP, Device portal, your own platform) the Lisa
will perform a configuration update. However, this will not
be done when the Lisa is not programmed to work with
Fixed settings.
During the configuration update the settings of the device
are updated. When a new configuration URL is found, the
Lisa will perform the configuration update again, this time
getting the settings from the ‘new’ platform.
Next, a software update check will be performed. When
the feature is enabled, the Lisa will look if there is a new
software version available on the update server. In case a
software update is needed, the Lisa will get the new
software. The conditions for software update are
explained in detail in
When will Lisa device(s) update
automatically .
The next step in the Startup procedure is the Schedule
Update. The Lisa will get the schedule file (when
available) from a remote server and update the on-board
schedule.
Next, the Lisa will try to retrieve from the last saved
settings whether it was playing from internet or from the
card, which we also call the source.
After power on, the Lisa “picks up where it left”. In other
words, if station 2 was playing from internet when you
powered off your device, the same station starts playing
the next time when you power on the device. The Lisa
achieves this by saving certain settings, such as last
played station, last played playlist etc.