Streamit Lisa LCD, Руководство пользователя

Страница: 14 / 87

Lisa LCD 14
3
Using the Lisa
3.1 Switching on the Lisa for the first time
The first time the Lisa LCD is powered on, it will start in the configuration wizard mode.
1. The configuration wizard will ask the user for the most important configuration settings. Enter the
correct information during the configuration wizard, especially with regard to IP settings. The Lisa
requires valid IP settings to be able to connect to the provisioning platform, software update server and
activation server. For networks employing a proxy, you must use the
Lisa Configuration Tool to
configure the correct proxy details.
2. After the configuration wizard is complete, the device will try to connect to the default provisioning
platform (Streamit Device portal) . Shortly after that, it will look whether a new version of the software
is available and update if required.
3. Register and assign the correct configurations for this device in the chosen provisioning platform. The
default provisioning platform is the Streamit Device portal. When a different provisioning platform is to
be used, please use LCT to configure the correct platform location.
4. Reboot the device once, to get configurations from the provisioning platform.
During startup, the device activation is executed. The Lisa device will receive code from the activation
server, enabling the capabilities on the device that correspond to the purchased edition. For more
information, please see
Device activation .
3.2 Device activation
All Lisa devices are shipped with Basic edition capabilities. The Basic edition only supports streaming of
content in MP3 format. If you have purchased a device of a different edition, this will only be enabled after
the device has been activated.
Activation is done during startup. During activation, the Lisa device receives code from the activation
server, enabling the capabilities on the device that correspond to the purchased edition (e.g. Ultimate).
Please note that it is not possible to upgrade/downgrade to a different edition after the purchase is made.
The activation process for a Lisa device running up-to-date software is automatic and transparent to the
user. During startup, a non-activated Lisa device will connect to the activation server. For this to
succeed, internet connectivity is required, the device needs to be connected properly and correct
network settings have to be programmed.
All Lisa devices need to be connected at least once to the public internet for activation, before it can
be used in a private network.