STREAMCORE SG4412, Руководство пользователя

Страница: 10 / 26

Streamcore.com Page 10 on 26
2021 Streamcore SAS - All rights reserved
The following table lists the commands available in Maintenance menu:
Commands Description
configure Enters configuration mode
exit Leaves the current mode. If changes are pending, a confirmation is requested
ping [IP_add]
Sends ICMP ECHO_REQUEST to a network host. Specify an IP address as
destination.
reset_configuration
All the operational software and configurations are thus deleted, the name of
the StreamGroomer and the parameters of the interface providing access to
the SGM are set on the default value attributed at the factory. This option
requires certain precautions.
restart [A/B/U] Restarts the SG in the chosen version (OPE A, B or Boot)
show […]
Displays various information about the SG and the admin network. See the
table hereafter.
traceroute [IP_add] Traces path to a network host. Specify an IP address as destination.
help Lists the available commands
The following table lists the parameters of the show command:
Show command details Description
show arp
Lists the entries of the ARP table
show changes
Presents the changes between the current configuration and the pending
changes
show conf
Presents the current configuration
show date
Shows the system date and the last time update (every day at midnight)
show interface
Gives the active status of the interface with its IP Address, MAC Address, MTU
and transmitted volume
show iprouting
Presents the admin routing table of the SG
show version
Presents the type of the SG, its serial number, the installed and activated
version of the SG
4.3.4 Examples
The following examples show the outputs of the
show
commands:
Example 1: Display the software versions installed on the SG:
[SG4412 > maintenance] show version
Running OS : BOOT StreamCore-USINE-M4G64-S40-308fabf1bb81
SG flash type : M4G64
SG type : SG4412
Serial number : X12L1234
Installed versions
Partition S : StreamCore-USINE-M4G64-S40-308fabf1bb81
Partition A : StreamCore-OPE-M4G64-6.2.08-2868f3829bd1
Partition B : StreamCore-OPE-M4G64-6.4.05-e77e407888a8
[SG4412 > maintenance]
Example2: Display the status of the ADMIN interface: The command displays DOWN when the SG is not connected to the
network with the ADMIN interface. It cannot be managed by the SGM.