U S E R M A N UA L
U S E R M A N UA L
EN
9
SUCTION
!
On/Off switch
@
Adjustable extraction control
#
Re-set button (safety switch)
$
Handle
%
Flap for changing the filter bag/
Micro filter
^
Socket for control cable (for automatic
operation in the milling machine)
&
Mains cable socket
*
Point of connection for extraction tube
(
Suction adapter (Art. No. 179601) for connec-
tion to the required unit (not included in the
delivery contents of the extraction unit)
BL
Extraction support for filter bag
BM
Micro filter
BN
Flap for changing the carbon brushes
PRODUCT DESCRIPTION
The extraction is suitable for use with a dental
milling machine.
The separate mains cable attachment allows
automatic operation with the milling machine.
The extraction unit has a special filter bag and a
HEPA micro filter, which filters up to 99.97 % of
fine dust particles (i.e. zirconium oxide dust
particles) and is classified in the fine dust particle
category M.
INITIAL OPERATION
After unpacking the unit, please check for possible
transport damage. Should you find any damage,
please claim the damage from your supplier
immediately. The extraction unit is available
in 2 voltage strengths (100 - 120V and 230V).
Before connecting to a power source, please check
whether the voltage on the type plate at the
back of the housing corresponds to your voltage,
and make sure the ON/OFF switch is OFF.
TUBE CONNECTION
Connect the extraction tube at the designated
connection point
&
directly to the extraction
unit and the conical side to the chosen device by
means of the supplied adapter
(
.
ELECTRICAL CONNECTION
Manual Operation
Connect the extraction
&
to the power source
using the enclosed mains cable. The extraction
unit is put into operation using the ON/OFF
switch
!
at the positions ON/OFF.
