Stratford EcoBoiler BK068, Руководство по эксплуатации и установке, Страница: 23 / 44

Stratford EcoBoiler Stove
INSTALLATION
Temperature and Pressure Relief Valve
With solid fuel appliances it is not practical to pro-
vide a sufficiently rapid reaction for shutting down
the fuel in the event of a sudden rise in water
temperature and a temperature valve or prefera-
bly, a combined temperature and pressure relief
valve should be installed to operate in the event
of high water temperatures occurring.
See diagram below.
HOT WATER SYSTEM
Before handing over the installation to the
customer it is strongly recommended that the
appliance is lit and the functioning of the
chimney, hot water and heating system is
checked.
A checklist (Pre-Lighting checks) appears in the
Operating Instructions, but in addition to this the
installer should:-
•
Operate the heating system and set the
pump head.
•
Balance the radiators.
•
Re-vent and ensure there are no air locks
HOT WATER SYSTEMS
Is boiler cross-flowed? YES/NO
Are the pipes correctly sized? YES/NO
What is the calculated output required to
heat the system?
Is a heat leak fitted? YES/NO
What is the return water temperature?
Is the pump thermostatically controlled
by a pipe stat?
YES/NO
What is the height and distance of the hot
water tank above the stove?
•
Check the circulation round the primary
system and the heat leak radiator.
•
Be sure that all the chimney is operating
and that ALL smoke and fumes are vented
to the atmosphere through the chim-
ney terminal.
•
Check all joints and seals
•
Clean the outside of the appliance to pre-
vent any stains from becoming permanently
burnt on.
•
Check the flue draught which should read
0.1 to 0.2mbar.
Hot Water system Check list
The following details MUST be checked and
completed in full by the installer at the time of
Installation. Please answer all questions as fully as
possible.
Arada Ltd . can not be held responsible
for the flue, chimney or for the stove installation.
23