14
Figure 5.12
Position the Ridge caps over the Ridge Beam. The outside edge of the Ridge
Caps should line up with the outer face of the Barge Supports (Figure 5.12).
Ridge Cap
Barge Support
300mm
Ridge Cap Overlap
10x16 self-drilling screw
with neo washer
Figure 5.13
Use a single 10x16 self-drilling screw with neo washer to secure the
overlap of the ridge caps to the Ridge Beam. Fasten the Ridge Cap to the
Ridge Beam using 10x16 self-drilling screws with neo washers at 300mm
spacings along the entire length of the Ridge Cap (Figure 5.13).
Sliding Rail
Runner Rail
Door Roller
Figure 5.15
The Door Roller should fit into the Sliding Rail at the top. The bottom of
the Door should fit into the Runner Rail at the bottom (Figure 5.15).
Figure 5.14
Slide the Door into the Sliding and Runner Rails.
10x16 self-drilling screw
with neo washer
Roof Sheet
Figure 5.10
Install the opposing side Roof Sheets as per previous steps.
Rivet
Figure 5.11
Crest-fix adjacent roofing sheets together at mid-span and Wall Channel
ends using rivets (Figure 5.11).
