10
Corner Bracket
Top Channel
Figure 4.2
Fit the Corner Bracket over the Top Wall Channels. Ensure the pilot holes
of the Corner Bracket and Wall Channels line up (Figure 4.2).
10x16 self-drilling screw
Corner Bracket
Top Channel
Figure 4.3
Fasten through the Corner Bracket pilot holes and into the Top Channels
using 10x16 self-drilling screws (Figure 4.3).
10x16 self-drilling screw
Corner Bracket
Figure 4.6
Fit the Bottom Corner Brackets of all four corners over the Bottom Wall
Channels. Fasten through the Corner Bracket pilot holes and into the
Door Channel using 10x16 self-drilling screws (Figure 4.6).
Door Shroud
Door Jambs
Figure 4.5
Use the Door Shroud as a guide to set the correct spacing between the
Door Jambs. Fit the Corner Bracket as per Figure 4.2 - 4.3.
Door Jamb
Sliding Rail
Corner Wall Sheet
(Right Wall)
Fit the Remaining Wall Assemblies as per Figure 4.1 - 4.3.
The unfixed Door Jamb must be moved into position before fixing the
Right Wall Assembly to the Front Wall Assembly.
Slide the Door Jamb over the corner of the Right Wall Sheet (Figure 4.4).
Figure 4.4
Door Jamb
10x16 self-drilling screw
Figure 4.7
Fasten two 10x16 self-drilling screws through pilot holes in the Door Jamb
and into the Corner Sheet (Figure 4.7).
