Stratasys V650 Flex Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 24

Stratasys V650 Flex Скачать руководство пользователя страница 5

Site Preparation Guide

About the V650 Flex Printer

Page 1

About the V650 Flex Printer

The Stratasys V650 Flex 3D printers incorporate the latest in innovative technology to provide

you with precise prototypes from a CAD design. The V650 Flex 3D printer is capable of

building parts up to 20 x 20 x 23 inches in size, using stereolithography technology. The

printer’s open architecture allows it to be used with any commercially available resin. When

paired with SolidView Build Preparation software, job files may be adapted to build parts with

any resin. The V650 Flex printer is controlled by PC-based Phoenix machine-control software,

which is accessed via a user-friendly touch-screen interface.

Components

• The V650 Flex Printer
• Resin Vat
• Resin
• Welcome Kit containing:

• Documentation on how to download your user guide
• Common tools for maintaining the printer
• Calibration tools
• Platen
• Assorted hardware (shipped loose)
• Laser safety eye-wear
• Nitrile gloves, Qty 100
• Network cable, 15 ft
• USB Flash drive
• Wireless mouse and keyboard
• SolidView software package

V650 Highlights

• Maximum build volume (W x D x H): 20 x 20 x 23 inch (508 x 508 x 584 mm)
• Open vat system with 4 pre-qualified materials
• Built for production
• Stratasys infrastructure
• Multiple vat sizes (Full, Half, Quarter)
• X/Y build resolution: 0.0005 inch (0.013mm)
• Z build resolution: 0.0000625 inch (0.0016mm)
• Touchscreen graphical user interface

«
...
3
4
5
6
7
...
»

Содержание V650 Flex

























Отзывы:

Нет отзывов