Stratasys V650 Flex, Руководство по подготовке площадки, Страница: 21 / 24

Site Preparation Guide Preparing For Installation
Page 17
3. From the left side of the printer, use the forklift to carefully raise the printer off of the
shipping crate base.
4. Move the printer to its approximate operating location and lower it to the floor.
5. Inspect the printer’s exterior for dents and scratches. Immediately report any damage to
Stratasys and the shipping company.
6. Remove and unwrap the following bubble-wrapped components from the shipping crate
base:
• Recoater covers (Qty 3 - left, right and front)
• Light stack
7. Set aside the base to be reassembled/packed for storage.
Caution:
Do not allow the printer to drag on the floor surface. Dragging will cause damage to
the printer’s leveling feet.
Position the printer to allow at least three feet of clearance on all sides until the
installation process is complete, see “Physical Specifications and Space
Requirements” (page 3) . Refer to Chapter 2 of the V650 Flex User Guide for final
setup instructions.