Stratasys ProBleacher Product Guide
Spare Parts
Page 9
© Copyright 2021 Stratasys. All rights reserved.
Spare Parts
This product is not user-serviceable, except for the LED lamps. Replacement LED lamps are
available for purchase from your distributor or directly from our web store. Should something
break, refer to the warranty section of this guide. If your unit is not covered by the warranty,
contact your regional service provider for help.
Storage and Transportation
If it is necessary to transport or store this product, the following will ensure the safety of the
device:
1. Turn off the power switch.
2. Unplug the product from the power.
3. Wipe the inside and outside of the product with mild detergent and water or isopropyl
alcohol to remove excess resin and other debris.
4. Ensure the chamber is empty.
5. Place the product in the packing bag (optional).
6. Reinstall the protective foam end caps that originally shipped with the product onto the left
and right sides of this product.
7. Slide the bagged product with the end caps into the original boxes. Keep the product
upright.
8. Place the power cord in the open space created by the protective foam end caps.
9. Close the top of the boxes using reinforced paper tape (preferred) or clear adhesive
shipping tape (if you do not have access to reinforced paper tape). Tape all box seams.
10. Store and transport the product in the upright position.
It is not necessary to remove the LED lamps for storage or transportation.
