background image

Stratasys ProBleacher Product Guide

Page 2

© Copyright 2021 Stratasys. All rights reserved.

Copyright

© Copyright 2021 Stratasys. All rights reserved.
This documentation contains proprietary information of Stratasys Ltd. This information is 

supplied solely to assist authorized users of this cleaning system. No part of this document 

may be used for other purposes, and it may not be disclosed to other parties. 
The specifications on which this document is based are subject to change without notice.
No part of this book may be reproduced in any form or by any means, nor stored in a database 

or retrieval system, without prior permission in writing from Stratasys Ltd.
If this document is distributed as a PDF file, you may print it for internal use.
DOC-01010 Rev. C

Trademark

Stratasys, Stratasys logo, Objet, PolyJet, and ProBleacher are trademarks of Stratasys Ltd. 

and/or its subsidiaries or affiliates and may be registered in certain jurisdictions.
All names of product names and trademarks are the property of their respective owners. 

Liability

Stratasys shall not be liable for errors contained herein or for incidental or consequential 

damages in connection with the furnishing, performance, or use of this material. Stratasys 

makes no warranty of any kind with regard to this material, including, but not limited to, the 

implied warranties of merchantability and fitness for a particular purpose. It is the responsibility 

of the system owner/material buyer to determine that Stratasys material is safe, lawful, and 

technically suitable for the intended application as well as identify the proper disposal (or 

recycling) method consistent with local environmental regulations. Except as provided in 

Stratasys' standard conditions of sale, Stratasys shall not be responsible for any loss resulting 

from any use of its products described herein.

Disclaimer

Customer acknowledges the contents of this document and that Stratasys parts, materials, and

supplies are subject to its standard terms and conditions, available on

https://www.stratasys.com/legal/terms-and-conditions-of-sale

, which are incorporated herein 

by reference.

Stratasys Ltd.

www.stratasys.com

Comments: 

[email protected]

Содержание ProBleacher











Отзывы: