Stratasys ProBleacher Product Guide
Care and Maintenance
Page 8
© Copyright 2021 Stratasys. All rights reserved.
Run Screen
The
Run
screen displays the settings and status of the product.
Figure 3:
Run
screen
Care and Maintenance
This product is almost maintenance free, but it is recommended to keep the reflective surfaces
clean to allow sufficient light to the parts.
The preferred materials for cleaning the interior and exterior surfaces are mild detergent and
water. Follow the following guidelines:
• Before cleaning, unplug the product from the electrical outlet.
• Use a soft cloth dampened (not dripping) with soapy water.
• Do not soak the this product in water or other liquids.
• Wipe surfaces until clean, and then rinse with a clean cloth dampened with clean water.
• For resin residue, use isopropyl alcohol. If isopropyl alcohol is used, allow it to evaporate
with the door open before connecting this product to power.
• You can use general purpose household cleaners, such as 409
®
, Fantastik
®
, or Windex
®
for the reflective surfaces.
• Be careful when cleaning the Lexan
™
work surface inside the chamber not to allow excess
cleaning product to run over the edges where it would be impossible to wipe clean.
• When all surfaces are dry it is safe to reconnect the product to the electrical outlet.
Table 1:
Run
screen components
#
Component
#
Component
1 Status of the door, lamps, and heater
4
Pauses the process until you tap Resume
2 Selected program time and temperature
settings
5
Stops the process and returns you to the
main screen
3 Process time remaining and chamber
temperature
3
1
2
5
4
Do not use harsh solvents like acetone, MEK, Toluene, etc. They will damage the
product. When in doubt, contact your regional service provider.
