Stratasys ProBleacher Product Guide
Overview
Page 4
© Copyright 2021 Stratasys. All rights reserved.
Overview
ProBleacher is a photobleaching chamber. It uses LED light to provide an ideal environment
suitable for photobleaching 3D PolyJet printed models.
Warranty
ProBleacher has a limited one-year warranty (or greater when required by local law) that
covers everything except the LED lamps, which are considered consumable items. Details on
the warranty can be found in the legal section of the Stratasys website:
https://www.stratasys.com/legal/system-warranty-period
https://www.stratasys.com/legal/terms-and-conditions-of-sale
Compliance
This product is CE and FCC compliant.
Safety
Read these important safety guidelines before using this product.
1. This product is intended for photobleaching 3D printed models. Do not use this product for
any other purpose as the safety of the product cannot be ensured.
2. Do not put flammable liquids in the chamber. Allow any solvents on the printed models to
completely evaporate before placing them in the chamber.
Flammable fluids in the chamber create a risk of fire and/or explosion.
3. Do not place items on or around this product to maintain unblocked airflow. Keep
flammable liquids away from this product. Do not put liquids on top of the product, as a spill
could create a risk of electric shock.
4. Do not look at the lamps without appropriate eye protection. This product is equipped with
a safety interlock that turns off the lamps when the door is opened.
5. Should this product malfunction in any way, immediately unplug it and contact your regional
service provider. Do not continue to operate a malfunctioning unit, as damage or even
injury may occur.
6. If you have any questions about the setup, use, or care of this product, please contact your
regional service provider.
