6WUDWDV\V --
2SHUDWLQJ DQG 0DLQWDLQLQJ WKH 3ULQWHU
'2& 5HY $
7. For Support material, select the number of cartridges to replace.
❒
In High Mix / High Quality and High Speed modes, you can print
using one or two Support cartridges.
❒
In Super High Speed mode, at least two Support cartridges are
required; you can print with up to four Support cartridges.
8. If the color or mechanical properties of the first printed models are
unimportant, and if you did not change the printing mode (High
Quality/Speed) you can replace the Model materials without flushing out
the current materials. To do so, continue with "Changing Model Materials
Without Flushing" on page 4-18.
9. To flush out material currently in the system, choose the flushing cycle
that fits your needs:
7KHGHIDXOWIOXVKLQJF\FOHLVWKHRQHXVHGIRUWKHODVWPDWHULDOUHSODFHPHQW
❒
Economy. This cycle can be used when replacing a light-colored Model
material with a darker material (such as TangoBlack™ or VeroBlack™)
or if the exact color of the printed models is unimportant. Use this
cycle when replacing cleaning fluid with any Model material.
The wizard flushes the system with the minimum amount of material
needed to ensure that models have the mechanical properties of the
new material.
❒
Full. Use this cycle when the printed models must have the exact color
of the new material.
The wizard thoroughly flushes the feed tubes and print heads needed
for printing, based on your selections in the previous screens.
7KHUHDUHDGGLWLRQDOVHWWLQJVWKDW\RXFDQVHOHFWIRUVSHFLDOSXUSRVHVVHH
$GYDQFHG6HWWLQJV,IQHFHVVDU\FOLFN
$GYDQFHG6HWWLQJV
EHIRUHFOLFNLQJ
1H[W
