Strata ADVANCEMULTI205P, Руководство по эксплуатации

Страница: 44 / 70

4.6 Operation of LIFT TIG/HF TIG/Smart TIG welding method
1. Selection of the welding method:
2) In the function selection interface, rotate
the knob to select the welding method, shown
below:
2. Selection of synergic parameters (only for
smart TIG, LIFT TIG and HF TIG go to the
step 3):
1) In the main interface, press the main knob
to enter the synergic parameter selection
interface.
2) In the synergic parameter selection
interface, rotate L Knob to select the required
synergic parameters and press it for
confirmation in the interface shown below:
3. Setting the welding current:
1) In the main interface, press the key to
enter the welding interface.
2) In the welding interface, rotate the knob to
select the welding current and then start to
welding, the interface shown below:
44
www.strata.co.nz
ADVANCEMULTI205P