3.2. 2 Operation of the Stick welding method
1. Selection of the welding method:
1) In the main interface, press the MENU key to enter the function selection interface;
2) In the function selection interface, rotate L Knob to select the Stick welding method and press
it for confirmation. Refer to Fig. 1;
2. Selection and setting of welding parameters:
1) In the main interface, press the MENU key to enter the welding parameter setting interface;
2) In the welding parameter setting interface, rotate L Knob to select the parameter as required
and rotate R Knob to set a value for the parameter, afterwards, press L Knob or R Knob for
confirmation as shown below:
Welding parameters
available by rotating L
Knob
Welding parameters
available by rotating R
Knob
Hot Start
0-10
Arc Force
0-10
3. Setting of welding voltage:
1) Press the ENTER key to enter the welding interface shown below:
2) In the welding interface, rotate L Knob to set the welding current, and then press it for
confirmation;
41
www.strata.co.nz
ADVANCEMIG 255C
