(4) Select a PA or liner and carefully unravel avoiding putting any kinks in the liner.
(5) Carefully and slowly feed the liner in short forward movements down the cable assembly all
the way through and out the torch neck end. Avoid kinking the liner, kinking the liner will ruin it
and require replacement.
(7) Leave the liner extending out the end of the torch neck end by 3mm.
(8) Place the tip holder over the end of the liner and screw into the torch neck nipping it up
tight.
(6) Fit the liner collet, liner O-ring and
liner retaining nut.
(6) Push the liner firmly into the torch lead
and tighten the liner retaining nut
.
26
www.strata.co.nz
ADVANCEMIG 255C
