issue V8.3E from
01.07.2019
6
2.1
Electrode cables
(application part)
Ten electrode cables, that are R, L, N, F and C1 to C6, constitute the adaptation unit. A specially designed
combined electrode head, self-locking and equipped with a silver/silver-chloride electrode opens and adheres to
the patient's body on slight finger pressure.
2.2
Distributor
The so-called distributor, the topmost part of the support arm, holds the electrodes in such a way that they cannot
be connected improperly. Labels show the assignment of plugs and sockets.
2.3
Support arm
The support arm, a swivelling, telescopable positioning device, provides a high degree of comfort. Equipped with
a central swivel joint, the support arm can easily and quickly be fixed in any position required.
2.4
Vacuum unit
The vacuum unit of the DT80 controls the required vacuum level. A robust vacuum pump including an adapted
pressure vessel provides the selected pressure level. A special microprocessor control unit provides for coordinated
control of the overall function. Power socket, on/off switch, vacuum connector and the socket for the control unit
are located at the rear of the vacuum unit.
2.5
Control unit
The DT80 comprises a control unit which is connected directly to the vacuum unit. Equipped with an ON/OFF
button and four buttons for pressure levels as well as four light emitting diodes, the control unit enables functional,
informative and easy handling of the device.
3.1
Installation of the support arm clamping device
Note: Proceed similarly with other clamping devices.
Safety information:
Ensure there is a secure connection when mounting the clamping device
for the support arm so that the connection will not come loose!
Collisions
with other devices are to be excluded.
Fix clamping element at the desired position.
Insert support arm into the support device.
Please note!
Bores must match
!
3. Installation
