USER MANUAL
CONTACT LIGHTING CONTROL PANEL
WWW. ST R A N D L I G H T I N G .CO M
17
Step 3.
Use UP and DOWN arrows to change parameters. Use LEFT and RIGHT arrow button to navigate be-
tween parameters (hours / minutes / seconds).
Step 4.
When all edits to Set Time are complete, press [Enter] button to save confi guration. NOTE: Pressing
[Escape] button will go to previous menu and changes will not be saved.
SET DATE
This feature allows the setting of the date in the Time Clock.
To set Date:
Step 1.
At CLOCK CONFIG menu, navigate to Set Date and press [Enter] button.
Step 2.
To begin editing Date, press [Enter] button. The fi rst parameter (month) will be highlighted.
Step 3.
Use UP and DOWN arrows to change parameters. Use LEFT and RIGHT arrow button to navigate be-
tween parameters (month / day / year).
Step 4.
When all edits to Set Date are complete, press [Enter] button to save confi guration.
NOTE:
Pressing [Escape] button will go to previous menu and changes will not be saved.
SET LOCATION
This feature sets the location for the relay panel. For Sunrise and Sunset timing operation, Latitude and Longi-
tude must be confi gured.
To set the location:
Step 1.
At CLOCK CONFIG menu, navigate to Set Location and press [Enter] button.
Step 2.
At SET LOCATION screen, navigate to Choose City From List and press [Enter] button.
Step 3.
At next screen, choose your city* and press [Enter] button. The location information will be set for the
real time clock.
NOTE:
*If your city is not listed, chose the city closest to your location. You may also manually set the Latitude,
Longitude and Time Zone, if desired.
