STRALUS SLLS001, Руководство пользователя

Страница: 8 / 32

Essential Information
1
8
1.4 Transportation Position
To move this product the operator must first place
the bed in the transportation position. A step by step
guide to moving your Stralus bed can be found in
Section 3.3
The transportation position defines the following
conditions. The bed may only be moved once all
these conditions have been met.
NOTE ON STABILITY AND BUMPS:
This product has been designed to function on slopes of
less than 10 degrees and be transported over bumps with a
maximum height of 20mm. Transportation through environments
outside this should not be attempted. If the operator is unsure
of the environment they must consult their facility manager.
—
Not Supporting a Resident:
The bed is not
supporting a resident or any other person in any
manner. This includes lying, sitting, leaning or
resting on the bed.
—
Not Supporting a Load:
The bed may not
have any additional load other than mattress,
linen, accessories and style packs when in the
transportation position.
—
Maximum Height:
The bed is at its maximum
height before transportation.
— Back and Head Rests are Flat: Both the back
and leg rests must be completely flat.
— Lockout Activated (If Applicable) :
If the bed is equipped with an attendant control
panel (ACP) the lock out should be enabled.
— Power cable is stored safely and correctly:
See Section 3.2
— Wall bumper is held up: Using provided tether,
see Section 3.1 for use.