3.5" 3Gbps-Speed SATA Mirror Drive Model User’s Manual
12. With the replacement unit's drive lever closed, push the drive firmly right into the unit.
13. Confirm that the front lever is locked.
14. Turn on the power supply of the host computer.
15. Several seconds after replacing the drive unit, data reconstruction will start. The drive status
indicator of the replacement drive unit will flash orange (@1 second interval).
Important
Do not remove the drive unit while data reconstruction is underway.
16. During
data
reconstruction, the drive status indicator of the replacement drive will flash orange,
while the drive status indicator of the fully functional drive unit will light green. The access
indicator will not light.
17. When data reconstruction is complete, the drive status indicator will go out.
18. If the drive status indicator of the replaced drive unit turns orange once again, repeat the
procedure, starting with step 10.
23