3.5" 3Gbps-Speed SATA Mirror Drive Model User’s Manual
3.3 Cable Connection
<1> Connect SATA power cable that supplies DC +5V.
<2> Use a standard SATA signal cable to connect to the host computer.
efore turning on the host computer, gently press the front face of each drive unit to confirm that these
check if the host computer detects the unit
Power connector
SerialATA connector
3.4 Turning on The Main Power
B
are firmly inserted and verify if the lever lock is firmly fixed.
Next, turn on the host computer’s main power supply and
correctly.
Push the drive units
and verify if the units
are firmly inserted.
Caution
Before turning on the host computer, make sure that both the Signal
and power cables are attached properly.
8
