background image

USING THE HOB

To de-activate the child lock:

1) Select the On/Off Key. (L will be dis

-

played on all Cook Zones).
2) Simultaneously touch the RHF cook 

zone and the down [-] key, the hob 

should beep.

3) Remove fingers and touch the down [-] 

key again. (The hob should switch off).
4) When you now switch on the hob “0” 

will be displayed in all cook zone displays, 

the hob can now be used normally.

Central On/Off switch

The central on/off switch enables all of 

the cooking zones to be switched off 

simultaneously at a touch of a key.

To switch on the hob

The hob is switched On by touching 

the“ON/OFF” key for 1 sec.
A beep sounds and all the heater displays 

show a full stop in the cook zone display.
If a heater is not selected in 10 seconds, 

the hob will turn off automatically.
The hob is switched off by touching 

the“ON/OFF” key for 1 second.  A beep 

sounds and all the heaters are switched 

off.

Switching on an individual hob cook 

zone

To switch on a cook zone it is necessary 

to actuate every cooking zone by means 

of two operations:
1) Touch the required cook zone key for 

approximately 1 second a beep sounds 

and the heater display shows the power 

level with normal brightness. 
The cook zones that are not selected are 

dimmed. When the cook zone selec-

tion is finished after 10 seconds, a beep 

sounds and all the heater displays that 

were dimmed show the power levels with 

normal brightness.

2) Select the required power setting using 

the up +/down – keys.

Switching off an individual hob cook 

zone

 

Once the cook zone is selected, it can be 

switched off by touching the down [-] key 

until the corresponding display shows “0”.  

Power Boost 

Temporarily boost the power to a cook 

zone by approximately 30%.  All cook 

zones can be boosted for a period of up 

to 5 minutes. After 5 minutes a beep 

sounds and the heater will return to level 

“9”.

Quick Operation

With the cook zone at power level 0, 

touch the down [-] key the power level 

will raise straight to 9.
With the cook zone at power level 9, 

touch the up [+] key the power level will 

raise to the Power Boost level and a beep 

sounds and the heater display shows “P”.

MINUTE MINDER

The minute minder uses the displays for 

the two rear cook zones, either side of the 

clock symbol.
The minute minder beeps when the set 

time has expired – it does not switch off 

any zone.

To operate

1) Turn on the hob, using the on/off key.
2) Ensure that no cooking zones have 

been selected. Select the minute minder 

by pressing the up [+] and down [-] keys 

simultaneously – the display will show 00. 

3) Set the minute minder by pressing the 

Содержание SIH600TC UK

























Отзывы: