STOVES S5-G700E, Руководство пользователя

Страница: 9 / 16

Installation
Some parts on the appliance are protected by a plastic
film. This protective film must be removed before the
appliance is used.
We recommend carefully slitting the plastic film along
the edges with a sharp knife or pin.
The packaging materials should carefully discarded
and not left within easy reach of children as they are
a potential safety hazard.
I
NSTALLATING AND FIXING THE HOB
Your hob can be fitted to any worktop with a thickness of 30
to 40 mm.
No overhanging surface or cooker hood should be closer to
the hotplate than 750 mm (29 1/2"). Fix in position in
accordance with fig. 4.
If fitting a 600 mm bridging unit above the hob unit, the sides
of adjacent cabinets may be lower than 750 mm, down to
336 mm depending on the cabinets fitted, provided that they
are resistant to heat and steam.
The hob has a special seal which prevents liquid from
entering the cabinet. Follow these instructions in order to
correctly apply this seal:
- detach the seals from their backing, checking that the
transparent protection still adheres to the seal itself.
- Turn over the hob and correctly position seal “E” (fig. 5)
under the edge of the hob itself, so that the outer part of
the seal itself perfectly matches the outer edge of the hob.
The ends of the strips must fit together without overlapping.
- Evenly and securely fix the seal to the hob, pressing it firmly
in place.
- Remove the strip of protective paper from the seal. Insert
the hooks “S” into their relative housings “H” on the hob
and place into the prepared hole in the cabinet. Lock in
place with the relative fixing screws “F” (see fig. 6).
Dimensions
FIG. 5
FIG. 6
Dimensions
Letter Measurement (mm)
A (G900C)
A (G1100C)
833
1060
B (G900C)
B (G1100C)
473
345
C (G900C)
C (G1100C)
73.5
80
D (G900C)
D (G1100C)
63.5
127.5
E (G900C)
E (G1100C)
155 min
70 min
FIG. 4