STOVES S5-G700E, Руководство пользователя

Страница: 10 / 16

Installation
T
ECHNICAL INFORMATION
The installation, the adjustments, conversions and
maintenance listed in this part must only be carried out by
qualified persons.
The safety and automatic adjustment devices of the
appliance may only be modified by an authorised Belling
service agent.
The installation of this gas hob must comply with the
standards in force.
This appliance is not connected to a flue for discharge of
the combustion products; therefore, it must be connected
in compliance with the above mentioned installation rules.
Particular attention must be paid to the instructions given
below for ventilation and aeration.
L
OCATION
The cooker may be located in a kitchen, kitchen/diner or a
bed-sitting room, but not in a room containing a bath or
shower. The hob must not be installed in a bed-sitting room
of less than 20 m
3
.
LPG models shall not be installed in a room or internal space
below ground level, e.g. in a basement.
P
ROVISION FOR VENTILATION
The room containing the cooker should have an air supply in
accordance with BS 5440: Part 2.
The room must have an opening window or equivalent; some
rooms may also require a permanent vent. If the room has a
volume between 5 and 10 m
3
, it will require an air vent of 50
cm
2
effective area unless it has a door which opens directly to
outside. If the room has a volume of less than 5 m
3
, it will
require an air vent of 100 cm
2
effective area (fig. 1). If there
are other fuel burning appliances in the same room, BS 5440:
Part 2 should be consulted to determine air vent
requirements.
NOTE: the use of a gas cooking appliance results in the
production of heat and moisture in the room in which it is
installed. Always ensure that the kitchen is well ventilated;
keep natural ventilation holes open or install a mechanical
ventilation device (fig. 2).
In particular, when using the grill or more than one hotplate
burner, open a window if a mechanical ventilation device is
not operating (fig. 3).
(*) Air inlet - minimum section: 100 cm
2
Make sure that you
have removed al the
packaging informa-
tion before you begin
installation. Any pro-
tective films / plas-
tics should be
removed before the
appliance is used.
FIG. 1
FIG. 2
FIG. 3
Packaging materials
are hazardous to
small children.
Please dispose of it
carefully.