To replace an oven light bulb
Caution:
Switch off the electricity
supply to the appliance at the socket,
to avoid the risk of electric shock.
Wait until the oven is
cool
, then
remove the oven shelves.
Grasp the lens cover on the light fitting
and pull it away from the side of the
oven. Unscrew the bulb.
Please note that the oven light bulb is
not covered by the guarantee.
Replacement bulbs can be ordered
from your local supplier, or bought
from a hardware store.
Environmental Protection
We are committed to protecting the
environment and operate an
Environmental Management System
which complies with BS EN ISO
14001:1996.
Disposal of packaging
•
All our packaging materials are
recyclable and environmentally
friendly.
•
Please help us to protect our
environment by disposing of all
packaging in an environmentally
friendly manner.
•
Please contact your local authority
for the nearest recycling centre.
Caution:
Packaging materials can
pose a risk of suffocation - keep away
from children.
5
INTRODUCTION
Step 2: Connect to the gas supply
The inlet to the cooker is
1
⁄
2
” BSP
internal situated at the rear centre.
Use a 900mm - 1125mm length of
flexible connector.
Natural Gas -
Flexible connections
should comply with BS 669. Parts of
the appliance likely to come into
contact with a flexible connector have
a temperature rise of less than 70˚C.
LP Gas -
For flexible connections, use
a bayonet type hose, suitable for use
on LP Gas up to 50 mbar pressure rise
and 70˚C temperature rise. The
flexible hose should be coloured black
with a red stripe, band or label. If in
doubt, contact your supplier.
After installation, make sure all
connections are gas sound
33
INSTALLATION INSTRUCTIONS
