Thank you for choosing a
British built appliance by Stoves
We hope the following information
will help you to quickly familiarise
yourself with the features of the
appliance, and to use it successfully
and safely.
Our policy is one of constant
development and improvement. Strict
accuracy of illustrations and specifications
is not guaranteed. Modification to
design and materials may be necessary
subsequent to publication.
This appliance must be installed in
accordance with the regulations in
force, and only in a well ventilated
space. Read the instructions before
installing or using this appliance.
Your 1st Year Guarantee
To fulfil the conditions of your guarantee,
this appliance must be correctly
installed and operated, in accordance
with these instructions, and only be
used for normal domestic purposes.
Please note that the guarantee, and
Service availability, only apply to the
UK and Republic of Ireland.
Before using the appliance
for
the first time, remove any protective
polythene film and wash the oven
shelves and furniture in hot soapy
water, to remove their protective
coating of oil. Even so, when you first
turn on the oven or grill you may
notice a smell and some smoke.
This appliance is designed to be
installed free-standing or flush to base
units.
Gas & Electrical connection
Please refer to installation instructions
for the Gas & Electrical Safety Regulations
and the Ventilation Requirements.
In your own interest, and that of safety,
it is the law that all gas appliances be
installed and serviced by competent
persons, who will comply with the
relevant standards and regulations.
Corgi registered installers undertake to
work to satisfactory standards.
Disconnection of gas and electric
appliances should always be carried
out by competent persons.
Warning:
This appliance must be
earthed.
The
Gas Consumer Council (GCC)
is
an independent organisation which
protects the interests of gas users. If
you need advice, you will find the
telephone number is your local
telephone directory under Gas.
2
INTRODUCTION
35
Step 5: Commissioning
Burner aeration
All burners have fixed aeration and no
adjustment is possible.
Pressure setting
G20 Natural Gas @ 20 mbar
G30 Butane @ 28 - 30 mbar
G31 Propane @ 37 mbar
Ignition
All burners are ignited by pressing the
ignition switch on the fascia. When
the burner has lit release the ignition
switch. Turn the tap to the
FULL ON
position, wait a second before
pressing the ignition switch.
Before leaving the installation
1. Place all the loose parts of the
cooker into position.
2. Show the customer how to operate
the cooker and give them this
handbook.
Thank you.
Conversion instructions
Natural Gas (
I
2H
) G20 @ 20mbar to LPG
(
I
3+
) G30 @ 28-30mbar / G31 @ 37mbar)
1. To convert hotplate burners
a. Remove pan supports.
b. Remove burner caps & burner heads.
c. Unscrew existing injectors from
hotplate burner bowls.
d. Replace with injectors in conversion
kit as detailed above.
2. To convert hotplate bypass pins
Before carrying out this procedure ensure
that the appliance is disconnected from
gas and electrical supplies.
a. Remove pan supports.
b. Remove burner caps and heads.
c. Remove the control knobs and
timer buttons from the fascia panel.
d. Unscrew and remove the fascia
panel fixing screws located
beneath the fascia panel and gently
lower the fascia panel. Remove
the ignition and light switch leads
from the back of the switches.
e. The hotplate bypass pins are now
accessible through the inner fascia
panel. Unscrew each pin and
replace as detailed above.
3. Data labels
After completing the above procedure
affix label (A), supplied with the
conversion kit and remove the
label currently fitted, label (B).
label (A): PER / FOR G30/G31
label (B): PER / FOR G20.
INSTALLATION INSTRUCTIONS
