STOVES 600GR Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 34

STOVES 600GR Скачать руководство пользователя страница 6

Cooling fan

When you switch on the oven or grill
you will hear the cooling fan come on.
This  fan  provides  air  for  the  burners
and  keeps  the  exterior  of  the
appliance  cool  during  cooking,  and
the  appliance  will  not  operate  unless
the fan is operating.
The fan will continue to operate to cool
the  appliance  for  a  few  minutes  after
the last control has been switched off.
If  the  fan  malfunctions,  the  appliance
will  require  servicing.    Switch  off  the
electricity supply to the appliance.

Warning:

Do not use the oven if the

fan is not working.
When  hot  and  cold  air  meet,
condensation forms.  The outer door is
air cooled and the inner door gets hot,
so some condensation might form; this
is  normal  and  will  disappear  within
10 - 15 minutes.
During operation, a metallic click may
be heard occasionally.  This is caused
by  the  gas  valve  operating  and  is
quite normal.

Note: operating the control knobs

You  may  find  that  the  control
knobs  on  your  new  appliance
operate  or  perform differently    to
those you are used to.
The  controls  are  part  of  the  unique
electronic operating system of the appli-
ance  and  are  designed  to  be
extremely responsive  and  easy  to
turn.

Gas & Electrical connection

Please  refer  to  installation  instructions
for the Gas & Electrical Safety Regulations
and the Ventilation Requirements.
In your own interest, and that of safety,
it is the law that all gas appliances be
installed by competent persons, who will
ensure that  the  installation is  in  accor-
dance with “The Gas Safety (Installation
&  Use) Regulations”,  &  the  “The  Gas
Safety (Installation & Use) (Amendment)
Regulations”.  Failure to comply with these
Regulations is a criminal offence.
Corgi registered installers undertake to
work to satisfactory standards.
Disconnection  of  gas  and  electric
appliances  should  always  be  carried
out by competent persons.

Warning:

This appliance must be

earthed.

In the event of a power cut

1. Switch off the electricity to the

appliance at the socket.

2. When the power returns, see the

‘Programmer / Clock’ section to
‘Set the time of day’.

The

Gas Consumer Council

(GCC) is

an  independent  organisation  which
protects  the  interests  of  gas  users.    If
you  need  advice,  you  will  find  the
telephone  number  is  your  local
telephone directory under Gas.

4

INTRODUCTION

«
...
4
5
6
7
8
...
»

Содержание 600GR



































Отзывы:

Нет отзывов