STOVES 600GR Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 34

STOVES 600GR Скачать руководство пользователя страница 11

Caution:

When you are cooking

keep children away from the
vicinity of the oven.

Manual operation

The  oven  cannot  be  used  manually
when  the  programmer  is  set  for
automatic cooking.  If auto is showing
on the programmer display, press the
cook  time  and  ready  time  buttons
simultaneously to cancel the automatic
setting and return to manual operation.
The door must be

closed

for the oven

burner to ignite.  The oven burner will
go  out  when  the  door  is  opened  but
will  re-light  when  the  door  is  closed
again, this has no detrimental effect on
the food being cooked.
Turn the control knob anticlockwise to
the required gas mark setting.
There  is  a  short  delay  before  ignition
whilst  the  cooling  fan  starts  and  runs
up  to  speed.    The  ignition  unit  will
spark  for  approximately  four  seconds
to light the burner; if ignition does not
occur, the computer will close the gas
valve  for  12  seconds  to  allow  any
unburnt  gas  to  disperse,  before
attempting  ignition  again.    This
sequence  will  occur  automatically  a
further 4 times only.  The green lamp
will  flash  if  ignition  does  not  occur
within 4 attempts.  The computer may
be  reset  if  ignition  has  not  occurred,
by  turning  the  control  off  then  on
again to the required setting.

Note:

The Rotostar burner will cycle on

and off during cooking, maintaining
an even temperature, giving greater
fuel efficiency.

Warning:

do not use the oven if the

fan is not working.

Note:

As part of the cooking process, hot air
is expelled through a vent at the top of
the  oven.    When  opening  the  oven
door,  care  should  be  taken  to  avoid
any possible contact with potentially hot
air, since this may cause discomfort to
people with sensitive skin.  We recommend
that  you  hold  the  underneath  of  the
oven door handle.

Automatic operation

See ‘Programmer / Clock’ section.
We recommend that 15 minutes is
added to the cooking time when using
the automatic cooking facility, to allow
for preheating.

9

USING THE OVEN

«
...
9
10
11
12
13
...
»

Содержание 600GR



































Отзывы:

Нет отзывов